oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if115.0m-12a 115.0mhz if saw filter 12.65 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if115.0m-12a january 2011 rev a 115.0mhz if saw filter 12.65 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1=56 nh, c1=68 pf output l2=3.3 nh, l3=39 nh source/load impedance 50 ?
oscilent part number 835-if115.0m-12a january 2011 rev a 115.0mhz if saw filter 12.65 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c 20 - 70 storage temperature range c 20 - 70 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 115.0 - insertion loss at fo db - 25.50 27.00 group delay variation (fo6.25mhz) nsec - 55 100 absolute delay time at fo usec - 4.31 - temperature coefficient ppm/ c - -18 - amplitude ripple (fo6.25mhz) db - 0.55 1.00 bandwidth at -1db mhz 12.60 12.65 - bandwidth at -3db mhz - 12.88 - bandwidth at -10db mhz - 13.25 13.30 bandwidth at -20db mhz - 13.52 - bandwidth at -25db mhz - 13.60 - bandwidth at -35db mhz - 13.70 - relative attenuation out of gain 400khz db 7 10 - out of gain 600khz db 20 30 - out of gain 1mhz db 45 55 - out of gain 5mhz db 50 60 -
oscilent part number 835-if115.0m-12a january 2011 rev a 115.0mhz if saw filter 12.65 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?10.0 db relative attenuation
oscilent part number 835-if115.0m-12a january 2011 rev a 115.0mhz if saw filter 12.65 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo6.25mhz group delay variation fo6.25mhz smith chart
oscilent part number 835-if115.0m-12a january 2011 rev a 115.0mhz if saw filter 12.65 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|
